Bell & Ross BR 05 BR05A-BLM-SKCE/SCE

Model #: BR05A-BLM-SKCE/SCE SKELETON BLACK LUM CERAMIC Bell & Ross BR 05 Automatic 40mm Mens Watch

Limited & numbered edition 500 pieces • Case: ceramic - sandblasted • Bezel: fixed, sandblasted • Dial: skeleton - with black tinted transparent panel • Markers: applied black, luminous • Hands: matte, black, luminous • Seconds hand: central large hand • Calibre: Bell & Ross calibre BR-CAL.322-1, beats at 4Hz/28800 vph, 25 jewels, power reserve of 54 hours (2 days) Condition : New/Unworn Edition : Limited Edition Case Shape : Square Case Dimensions : 41mm X 41mm Case Thickness : 11.2mm Case Material : Ceramic Dial Color : Skeleton Crystal : Scratch Resistant Sapphire Bezel : Fixed Screw-in Crown : Yes Water Resistance No ratingDoes not allow contact with water 30m/99ft - 50m/165ftAllows for contact with water such as washing hands and rain 50m/165ft - 100m/330ftAllows for light poolside swimming 100m/330ft - 200m/660ftAllows for swimming, snorkeling and showering (do not expose to hot water) 200m/660ft - 500m/1650ftAllows for impact water sports such as board diving and scuba diving 500m/1650ft +Appropriate for serious deep water diving. Learn more about Water Resistance. Close : 100m/10atm/300ft No rating : Does not allow contact with water 30m/99ft - 50m/165ft : Allows for contact with water such as washing hands and rain 50m/165ft - 100m/330ft : Allows for light poolside swimming 100m/330ft - 200m/660ft : Allows for swimming, snorkeling and showering (do not expose to hot water) 200m/660ft - 500m/1650ft : Allows for impact water sports such as board diving and scuba diving 500m/1650ft : Appropriate for serious deep water diving Case Back : Transparent Band Material : Ceramic Color/Finish : Black Band Notes : Sandblasted finish Clasp : Push Button Folding Clasp Movement : Automatic An automatic/self-winding movement is powered by a thin spiral torsion spring, called the mainspring, which is housed in an enclosed barrel inside the movement. The energy produced from the wound spring drives the movement functions. An automatic watch has a weighted rotor mounted on a pivot to the back of the movement, and the rotor is connect to the mainspring through a series of gears. The natural motion of the wearers wrist will cause the rotor to spin, which in turn will automatically wind the mainspring. Please note: An automatic winding watch which has completely wound-down or is at the end of its power reserve requires manual winding. Manually winding an automatic watch ensures that the watch is at full power-reserve when first worn, and as long as the watch is in motion thereafter it will remain fully wound, ensuring that when the watch is removed it will run the specificed power-reserve duration. Close