IWC Big Pilot IW329304

Model #: IW329304 IWC Big Pilot's Watch 43mm Mens Watch

Brushed & polished stainless steel case. Blue dial with a fine sunray finish. Polished hour & minute hands with luminous fill. White seconds hand. Bold numeral & index hour markers and with luminous 12, 3, 6 & 9 indexes. Printed minutes/seconds track. Bracelet: Fitted with a EasX-CHANGE system via a spring loaded lever allowing for easy removing/replacing. Patented sizing system, allows for removing & adding links very easy, no special tool or screwdrivers necessary. Micro adjustment deployant clasp allowing for optimum comfort. IWC in-house caliber 82100, beats at 28,800 vph (4Hz), contains 22 jewels & has a power reserve of approximately 60 hours. Condition : New/Unworn Case Shape : Round Case Dimensions : 43mm Case Thickness : 13.6mm Case Material : Stainless Steel Dial Color : Blue Crystal : Scratch Resistant Sapphire Screw-in Crown : Yes Water Resistance No ratingDoes not allow contact with water 30m/99ft - 50m/165ftAllows for contact with water such as washing hands and rain 50m/165ft - 100m/330ftAllows for light poolside swimming 100m/330ft - 200m/660ftAllows for swimming, snorkeling and showering (do not expose to hot water) 200m/660ft - 500m/1650ftAllows for impact water sports such as board diving and scuba diving 500m/1650ft +Appropriate for serious deep water diving. Learn more about Water Resistance. Close : 100m/330ft No rating : Does not allow contact with water 30m/99ft - 50m/165ft : Allows for contact with water such as washing hands and rain 50m/165ft - 100m/330ft : Allows for light poolside swimming 100m/330ft - 200m/660ft : Allows for swimming, snorkeling and showering (do not expose to hot water) 200m/660ft - 500m/1650ft : Allows for impact water sports such as board diving and scuba diving 500m/1650ft : Appropriate for serious deep water diving Case Back : Transparent Band Material : Stainless Steel Color/Finish : Brushed & Polished Band Notes : EasX-CHANGE system & easy sizing system Clasp : Deployant Buckle Lug Width : 21mm Movement : Automatic An automatic/self-winding movement is powered by a thin spiral torsion spring, called the mainspring, which is housed in an enclosed barrel inside the movement. The energy produced from the wound spring drives the movement functions. An automatic watch has a weighted rotor mounted on a pivot to the back of the movement, and the rotor is connect to the mainspring through a series of gears. The natural motion of the wearers wrist will cause the rotor to spin, which in turn will automatically wind the mainspring. Please note: An automatic winding watch which has completely wound-down or is at the end of its power reserve requires manual winding. Manually winding an automatic watch ensures that the watch is at full power-reserve when first worn, and as long as the watch is in motion thereafter it will remain fully wound, ensuring that when the watch is removed it will run the specificed power-reserve duration. Close