Oris Big Crown 01 748 7710 4063-07 8 22 19

Model #: 01 748 7710 4063-07 8 22 19 Oris Big Crown ProPilot GMT Small Seconds 45mm Mens Watch

Stainless steel case Coin edge pattern on the bezel inspired by a jet engine Grey dial Luminous Arabic numerals & index hour markers (Superluminova BG W9) Luminous hour and minute hand Displays the date between the 3 o'clock position Small seconds sub-dial at the 9 o'clock position GMT centre hand with yellow arrow pointing to 24 hour track on outer dial Oris 748 base SW 220-1 with red rotor, beats at 28,800 vph, contains 28 Jewels & has an approximate power reserve of 38 hours. Condition : New/Unworn Case Shape : Round Case Dimensions : 45mm Case Material : Stainless Steel Dial Color : Grey Crystal : Scratch Resistant Sapphire Bezel : Fixed Screw-in Crown : Yes Water Resistance No ratingDoes not allow contact with water 30m/99ft - 50m/165ftAllows for contact with water such as washing hands and rain 50m/165ft - 100m/330ftAllows for light poolside swimming 100m/330ft - 200m/660ftAllows for swimming, snorkeling and showering (do not expose to hot water) 200m/660ft - 500m/1650ftAllows for impact water sports such as board diving and scuba diving 500m/1650ft +Appropriate for serious deep water diving. Learn more about Water Resistance. Close : 100m/330ft No rating : Does not allow contact with water 30m/99ft - 50m/165ft : Allows for contact with water such as washing hands and rain 50m/165ft - 100m/330ft : Allows for light poolside swimming 100m/330ft - 200m/660ft : Allows for swimming, snorkeling and showering (do not expose to hot water) 200m/660ft - 500m/1650ft : Allows for impact water sports such as board diving and scuba diving 500m/1650ft : Appropriate for serious deep water diving Case Back : Transparent Band Material : Stainless Steel Color/Finish : Brushed & Polished Clasp : Push Button Deployant Buckle Lug Width : 22mm Movement : Automatic An automatic/self-winding movement is powered by a thin spiral torsion spring, called the mainspring, which is housed in an enclosed barrel inside the movement. The energy produced from the wound spring drives the movement functions. An automatic watch has a weighted rotor mounted on a pivot to the back of the movement, and the rotor is connect to the mainspring through a series of gears. The natural motion of the wearers wrist will cause the rotor to spin, which in turn will automatically wind the mainspring. Please note: An automatic winding watch which has completely wound-down or is at the end of its power reserve requires manual winding. Manually winding an automatic watch ensures that the watch is at full power-reserve when first worn, and as long as the watch is in motion thereafter it will remain fully wound, ensuring that when the watch is removed it will run the specificed power-reserve duration. Close Complications : GMT Time Zone